|
Details :
Principles of
Operation :
The Quick-Fill
System uses a special adapter assembly that can be easily
disconnected under pressure. On belt-mounted units, it's located
on the regulator while MMR units have a junction block and
fitting installed on the gauge line or integrated PASS module
such as the DragonFly or ICM. A Quick-Fill hose with a
quick-disconnect connects the air source to the adapter for air
transfer.
Approvals & Standards :
Because SCBA
performance is not affected, MSA Air Masks retain their NIOSH
certification and NFPA compliance during use of the Quick-Fill
System.
Hazards :
Confined Space
Fire
Oxygen Deficiency
Toxic Atmosphere IDLH
Product Information :
Lets MSA air mask
users refill and transfill air cylinders while the SCBA is worn,
without removing the air cylinder, even in IDLH atmospheres. Use
this MSA-exclusive option to fill an SCBA cylinder from a mobile
compressor or cascade system in less than a minute, transfill
between two cylinders, providing an emergency escape breathing
system or extend the air supply over longer durations, using a
remote compressed air source. Available on Ultralite II and MMR
and Custom 4500 II and MMR air masks, including dual-purpose
models.
|
